coreboot on ASRock H110M-DVS rev 3.0 and rev 2.0 and me_cleaner

[david]

@david trying to upload a working ME region that works for warm boot/Xeon (also in coreboot) since the REV2 / PBTC+ has a fraction smaller ME it fits. Try to insert it only with ifdtool in your current working whole ROM dump and flash the whole ROM back does it fix your warmboot issue?

Code: Select all

REV3 me size 2093056
PBTC me size 2084864
ifdtool -i me:PBTCMEXWBOK.bin rev3wholedump.bin -p sklkbl
#sorry forgot the platform quirk, this needed for any ROM/IFDTOOL editing...

Can you hint where to upload a file or is it only possible as topic starter?

Here is example on post replay "Attachments" it shall be possible if not i will check again.

[walterav]

The "Attachments" button beside the "Options" button is still missing for me.

[david]

The "Attachments" button beside the "Options" button is still missing for me.

I forgot somthing now it shall be working test it.

[walterav]

Thanks, full editor and preview shows attachments incoming 3...2...1... 0 lol invalid file extension so rename from zip to rom.

ME region only allows warm reboots on Xeon CPU's.

[david]

When you upload just zip the files and this file problay is rom renamed to zip ).

Supported archive formats are:

[david]

ME region only allows warm reboots on Xeon CPU's.

So this is some full ME , or clean ME and my CPU is 9600k.

[james2]

Hi all, thanks for your hard work @walterav.. sorry, been busy here.

[james2]

I will try n wipe the ME as @david was successful with at start of thread.

[walterav]

@david, its a coffeetime tool made corporate>consumer ME frankenstein ROM but since you mentioned coldboots only work for you sent this although only verified to work on kabylake Xeon CPU's yet, does it work for you?

@james2 take your time, try to read and answer my questions on the former page and maybe get this REV3 port going?

If someone can post the "data.vbt" of the REV3 and report the BIOS version you used to dump it, than I can supply a full coreboot rom to test.

[david]

@david, its a coffeetime tool made corporate>consumer ME frankenstein ROM but since you mentioned coldboots only work for you sent this although only verified to work on kabylake Xeon CPU's yet, does it work for you?

@james2 take your time, try to read and answer my questions on the former page and maybe get this REV3 port going?

If someone can post the "data.vbt" of the REV3 and report the BIOS version you used to dump it, than I can supply a full coreboot rom to test.

i still not understand that is coreboot rom ready to be flashed for rev2.0 3.0 ? or just original asrock bios with this special ME inside cos i only have rev 3.0 board here that currently is working with my 9600k only problem is cold boot other than that is working.